Digico Optocore V221 Manuel d'utilisateur télécharger pdf (Page 8)

DiGiCo Optocore V221

A1-8

A2.1 The Audio IO Panel

A2.1.1 Layout .................................................................................

Port List

Press Button to Select

Rack hardware status

Rack details

Adds Ports and Conforms all connected

racks at the same time

Remaps Inputs to Local

console onlly

Assign or Disable all Optocore Inputs

or Outputs on selected rack for this conso

Indicates card type and which Opto ID

has ownership of Output cards

Card status for optocore

Green tick = This console

Red Cross = Available

Red Cross Greyed Out = Unavailable

OTE - Output cards can only be taken

if no other console has them

Prevents changes to optocore settings

on all consoles in the system

Select one of these 3 buttons

to view relevant details

Optocore Remap button - should be used

if a message appears indicating

“Remap Required”

A2.1.2 Quick Start Guide for SD V370+ and Optocore V221 .......

Switch on all consoles and SD Racks and ensure that each device has a unique Optocore ID. The console’s ID is displayed in

either Status Bar on the Master Screen, the Network Panel or on the Meter Bridge of an SD7. If you need to change an ID of an

SD console, you will need to power cycle the SD console once the ID change has been made.

Optocore ID

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Pas de commentaire

Digico Optocore V221 Manuel d'utilisateur Page 8